Fritsch Equipment Corp.
Manufactured Products
Feed Plows
Forage Facers
Front 3pt Hitch
Grapple, Push Away
Hi-Dump Bucket
Poly Calf Stalls
Poly Veyor

All Products
Conveyors
Feed Carts
Feed Handling
Generators
Headlocks & Chutes
Manure Handling
Mills
Scales
Silos
Silo Unloaders
Stalls
TMR Mixers
Tub Grinders
Ventilation
Waterers

Used Equipment

Product Videos
Our Location
Contact Us
Home


Art's Way Driveline Augers

Powered by PTO or electric drive. These heavy duty augers have a precision engineered reversible gear box which permits PTO operation from either side. The sealed head assembly is grease packed and fully enclosed for continuous lubrication and protection from weather, dirt and other outside elements. Four bearings in the head assembly carry the load. PTO drives include a 48” power shaft and required protective shielding. Electric drives include the motor mount, V-belts and a 14” 2-groove pulley on models 8”-34’, 8”-46’ and 10”-34’. Larger models have 3-groove pulleys. Art's Way Driveline Augers

8" Standard Features

  • 12 gauge tube
  • 7 gauge flighting
  • Hand crank winch
  • Gear box
  • Intake cage
  • Tow hitch
  • All necessary shields
  • Discharge relief spout
  • Tapered roller bearing hubs

PTO drives include a 48” power shaft and the required protective shielding. Electric drives include motor mount, v-belts and 14” 2-groove pulley on models 8”-34’ and 8”-46’. Larger models have 3-groove pulleys. 1750 RPM motor recommended. Requires 4-1/2” OD motor pulley.

Drive Options:

  • 8” 540 PTO drive
  • 8” electric motor drive
  • 8” HD electric motor drive

Options:

  • Hydraulic worm winch
  • Poly flex hopper

10" Standard Features

  • 12 gauge tube
  • 1/4” flighting
  • Hand crank winch
  • Gear box
  • Intake cage
  • Tow hitch
  • All necessary shields
  • Discharge relief spout
  • Tapered roller bearing hubs

PTO drives include a 48” power shaft and the required protective shielding. Electric drives include motor mount, v-belts and 14” 2-groove pulley on the 10”-34’ model. Larger models have 3-groove pulleys. 1750 RPM motor recommended. Requires 4-1/2” OD motor pulley.

Drive Options:

  • 10” 540 PTO drive
  • 10” HD 540 PTO drive
    (Recommended for 10”x66’ and larger)
  • 10” electric motor drive
  • 10” HD electric motor drive
    (3 groove pulley - Recommended for 10”x66’ and larger)

Options:

  • Hydraulic worm winch
  • Poly flex hopper

 

 

 
home - product videos - used equipment - contact us
© Fritsch Equipment Corporation
All products and material displayed on this website are copyright their respective owners.