Feed Plows
Forage Facers
Front 3pt Hitch
Grapple, Push Away
Hi-Dump Bucket
Poly Calf Stalls
Poly Veyor
All Products
Conveyors
Feed Carts
Feed Handling
Generators
Headlocks & Chutes
Manure Handling
Mills
Scales
Silos
Silo Unloaders
Stalls
TMR Mixers
Tub Grinders
Ventilation
Waterers
Used Equipment
Product Videos
Our Location
Contact Us
Home
Rissler TMR
Feed enters heavy duty auger at left and right sides of mixer and keeps the feed higher in center as it blends. The feed spreads as it is carried towarsds the rear by the return chain. The heavy-duty chains with 1 1/2" high paddles blend the whole batch end for end. The auger overlaps ingredients at the rate of 1000 lbs. per minute -- this insures bery accurate mixes.
The blender offers fast top loading of forages and grains and easy unloading with an adjustable discharge chute. Blender can be started or stopped when full, saving energy and preventing unnecessary wear.
Options Available:
- 90 degree crank on discharge door
- motorized discharge door
- beam scales mounted on either side
- electronic 110 bolt beeper
- electronic scales with or without memory
| model | 55 | 75 | 105 | 135 | 150 | 175 | 190 | 230 | 300 | 360 | 400 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| buschel capacity | 44 | 60 | 84 | 108 | 120 | 136 | 152 | 184 | 240 | 288 | 320 |
| approx no. cows mix twice daily | 18 | 25 | 35 | 45 | 50 | 58 | 63 | 76 | 100 | 120 | 133 |
| forages at 20 lb. per cu. ft. | 1100 | 1500 | 2100 | 2700 | 3000 | 3400 | 3800 | 4600 | 6000 | 7200 | 8000 |
| motor h.p. | 3 | 3 | 3 | 5 | 5 | 7.5 | 7.5 | 7.5 | 10 | 10 | 10 |
| width | 50 | 50 | 62 | 62 | 62 | 75 | 75 | 75 | 87 | 89 | 89 |
| height with scales | 68 | 70 | 70 | 70 | 82 | 70 | 82 | 84 | 86 | 98 | 98 |
| length | 80 | 96 | 96 | 120 | 120 | 120 | 120 | 144 | 144 | 168 | 180 |
| discharge height with chute | 14 | 14 | 14 | 14 | 24 | 14 | 24 | 24 | 24 | 30 | 30 |
| auger size | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 12 | 12 |
| welded steel chains | wh78 | wh78 | wh78 | wh78 | wh78 | wh82 | wh82 | wh82 | wh82 | wh124 | wh124 |
| tensile strength | 30000 | 30000 | 30000 | 30000 | 30000 | 30000 | 30000 | 30000 | 30000 | 30000 | 30000 |
| pin size in mixing chain | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 9/16" | 9/16" | 9/16" | 9/16" | 3/4" | 3/4" |
| thickness of steel drive sprockets | 1" | 1" | 1" | 1" | 1" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/2" |
1 1/2" |
| roller chains | 60-60 | 60-60 | 60-60 | 60-60 | 60-80 | 60-80 | 80-80 | 80-100 | 80-100 | 80-100 | 80-100 |
home - product videos - used equipment - contact us
© Fritsch Equipment Corporation
All products and material displayed on this website are copyright their respective owners.